Sharp UX-600M - Manual (Page 86)

UX600MU-OSOS RT <P=001>
Ch
ap
te
r
9
Optional
Settings
A variety of optional settings are available which you can use to customize your
fax to better suit your needs. The settings are made by pressing the panel keys,
and each setting is described in the list below.
Accessing the Settings
1
Press the keys shown at right.
OPTION SETTING will appear in the
display.
2
Move through the list of settings by
pressing "#" to move forward, or "
*" to
move backward. The settings will appear
in the order listed below.
or
3
When the desired setting appears in the
display, make a selection as described
below. Your selection will be automat-
ically stored.
(Example)
4
Press the STOP key.
2
STOP
Settings
Setting 1: FINE RESOLUTION PRIORITY
This sets the default resolution (the resolution used if a setting is not made with
the RESOLUTION key) for transmitting documents. Press "1" (YES) to set it
to FINE, or "2" (NO) to set it to STANDARD.
• Initial setting: "2"
Setting 2: NUMBER OF RINGS TO ANSWER
This sets the number of rings the fax machine waits before answering an
incoming call in Auto reception mode. Enter any number from "1" to "5".
•
Initial setting: "4"
FUNCTION
4
74