Sharp UX-600M - Manual (Page 61)

<P=002>
Using the HOLD/SEARCH key
You can use the HOLD/SEARCH key to search for a Rapid Key or Speed Dial
number. First search for the number as described in "Using the
HOLD/SEARCH key" in "Dialing and Transmission" in Chapter 3, then pick up
the handset or press the SPEAKER key. The number will be dialed automat-
ically (do not press the START key).
Redial
The last number called can be redialed by pressing the REDIAL key (it is not
necessary to pick up the handset or press the SPEAKER key). When the other
party answers, pick up the handset to talk.
Hold
You can put the other party on hold during a conversation by pressing the
HOLD/SEARCH key. When this is done, they cannot hear you. You can put
the handset back in the cradle without breaking the connection. When you are
ready to speak with them again, pick up the handset. If you did not put the hand-
set back in the cradle, press the HOLD/SEARCH key again to resume conver-
sation.
Chapter 6 Making Telephone Calls
49