Sun Microsystems Netra 120 - Manual (Page 165)

Chapter 11 Replacing a Server or Replacing Individual Components 11-11
5. When you have reconnected the cables and powered the server on, type the
following at the ok prompt, using the values you noted in Step 1:
FIGURE 11-5 Replacing the NVRAM Chip
6. Replace the system cover and tighten the captive screw (see FIGURE 4-9 in
Section 4.7, “Replacing the Server’s Top Cover” on page 4-14).
ok reset-all
ok setenv diag-switch? noted_value
ok setenv diag-level noted_value
ok reset-all