Sun Microsystems Netra 120 - Manual (Page 56)

4-8 Sun Fire V120 and Netra 120 Server User’s Guide • December 2001
5. Carefully insert the DVD or CD-ROM drive into the chassis (see FIGURE 4-5 ).
Make sure that the catch at the rear of the DVD or CD-ROM drive clicks onto the
chassis. Guide the drive in so that its connectors align with, and then engage with,
the connectors on the paddleboard (see
FIGURE 4-5 ) at the back of the drive’s
enclosure in the chassis. You may need to hold the paddleboard by the black IDE
connector to guide the DVD or CD-ROM drive home.
6. Re-install the full-length PCI card if you removed one (see Section 4.6, “Installing
and Removing a PCI Card” on page 4-11).
7. Replace the server’s cover and tighten the captive screw (see FIGURE 4-9 in
Section 4.7, “Replacing the Server’s Top Cover” on page 4-14).
8. Replace the front bezel.
FIGURE 4-5 Installing an Internal DVD or CD-ROM Drive
Catch
Paddleboard