Sun Microsystems Netra 120 - Manual (Page 190)

C-4 Sun Fire V120 and Netra 120 Server User’s Guide • December 2001
disable_wdog_on_panic= Boolean
0=FALSE
1=TRUE 1 Causes the LOM to try to
disable its watchdog after a
system panic.
faulty_voltage_shutdown= Boolean
0=FALSE
1=TRUE 1 Causes the LOM to attempt first
to shut down the system and, if
that fails, to power off the
system in the event of a fatal
problem with the supply rails.
enclosure_warning_temp=
o C 67 Specifies the temperature at
which the LOM generates a
temperature warning.
over_temperature_shutdown= Boolean
0=FALSE
1=TRUE 1 Causes the LOM to attempt to
shut down the system, or to
power it off, if the enclosure
temperature exceeds the level
specified for the
enclosure_shutdown_temp
parameter.
enclosure_shutdown_temp=
o
C 72 Specifies the enclosure
temperature above which the
LOM attempts to shut the
system down, or, if this fails, to
power the system off. (The LOM
device will only attempt to do
either of these if
over_temperature_shutdown is
set to 1.)
serial_security= Boolean
0=FALSE
1=TRUE 1 Enables and disables the LOM
user security facilities even if
user security has been
configured. You can use this
parameter to set up users again
if your users have forgotten
their passwords.
TABLE C-1 LOM Configuration File Parameters (Continued)
Field Format Default Effect