Sun Microsystems Netra 120 - Manual (Page 58)

4-10 Sun Fire V120 and Netra 120 Server User’s Guide • December 2001
3. Replace the server’s cover and tighten the captive screw (see FIGURE 4-9 in
Section 4.7, “Replacing the Server’s Top Cover” on page 4-14).
FIGURE 4-6 Installing Memory into a Socket on the System Board
Note – There are four DIMM slots. The one nearest to the CPU fan is slot 0. The one
nearest to the power supply unit is slot 3. Put the first DIMM in slot 0, and install
subsequent DIMMs in contiguous slots.