Sony WALKMAN WM-GX788 - Manual (Page 58)

58
To reset A-B Repeat
When you want to change a
specific portion, stop the A-B
Repeat playback and tag point A
and point B again.
Notes
• You cannot specify a repeat
portion that includes both sides
of the tape.
• You cannot specify a repeat
portion shorter than 2 seconds.
• After repeated operation, the
actual portion that is played back
may shift somewhat from the
exact portion specified with the
tags due to tape slack.
• A-B Repeat stops automatically
after repeating 50 times.
• Do not use the A-B Repeat
function with tapes longer than
90 minutes. If you do, the tape
may be damaged.
Listening to the
Radio
1
Press RADIO ON/BAND to
turn on the radio.
2
Press RADIO ON/BAND
repeatedly to select AM or
FM.
3
Press MENU on the main
unit repeatedly and set the
cursor in the display to
TUNE MODE.
4
For manual tuning
1 Press SET to choose
MANUAL.
2 Press TUNE/PRESET + or
– repeatedly to tune in to
the desired station.
Hold down TUNE/
PRESET + or – for a few
seconds to scan for
stations.
For preset tuning
1 Press SET to choose
PRESET.
2 Press TUNE/PRESET + or
– repeatedly to recall the
desired preset station.
To use preset tuning,
preset stations first (see
“Presetting Radio
Stations”).
To turn off the radio
Press RADIO OFF.
To improve the broadcast
reception
• For AM: Reorient the unit
itself.
• For FM: Extend the remote
control cord (antenna). If the
reception is still not good,
press MENU repeatedly to set
the cursor in the display to FM
MODE. Then press SET to
choose from “MONO”
(monaural), “LOCAL” or none
(stereo) for best reception.