Sony WALKMAN WM-GX788 - Manual (Page 60)

60
4 While the frequency digits are
flashing, tune in to a station
you wish to store using
TUNE/PRESET + or – and
press ENTER.
The preset number will flash
in the display.
5 While the preset number is
flashing, select the preset
number you want using
TUNE/PRESET + or –.
6 While the preset number is
flashing, press ENTER.
Notes
• If you cannot complete step 4, 5
or 6 while the indicators are
flashing, repeat from step 3.
• If a station is already stored, the
new station replaces the old one.
To cancel a stored station
1 Follow the procedure of
“Playing the Preset Radio
Stations” and in step 5, select
the preset number you want
to cancel and then press
ENTER. The frequency digits
will flash in the display.
2 Press and hold TUNE/
PRESET + or –. The frequency
digit starts running up or
down. Keep holding down the
button until “- - - -” is
displayed.
3 Press ENTER while “- - - -” is
flashing. A preset number will
flash in the display.
4 Press ENTER to cancel the
stored station.
Playing the Preset Radio
Stations
1 Press RADIO ON/BAND to
turn on the radio.
2 Press RADIO ON/BAND
repeatedly to select AM or
FM.
3 Press MENU repeatedly to set
the cursor in the display to
TUNE MODE.
4 Then press SET to display
“PRESET”.
5 Press TUNE/PRESET +
or –.
Scanning the Preset
Radio Stations
1 Press RADIO ON/BAND to
turn on the radio.
2 Press RADIO ON/BAND
repeatedly to select AM or
FM.
3 Press and hold RADIO ON/
BAND for 2 seconds or more.
The preset stations of the
selected band will be played
for about 5 seconds each.
(While scanning the preset
radio stations, the indicators
in the display flash.)
4 Press RADIO ON/BAND
again to select the station
while the desired preset
station is being played.