SMC Networks ADSL Barricade SMC7204BRA - Manual (Page 111)

Configuring PPP Interfaces
112
Adding a PPP Interface Definition
If you intend to use more than one type of service from your ISP,
the device can be configured with multiple PPP interfaces, each
with unique logon and other properties.
Follow this procedure to define properties for a PPP interface:
1. From the [Point to Point Protocol (PPP) Configuration Page],
click [Add]. The [PPP Interface – Add] page appears, as
shown in Figure 38.
Figure 38. PPP Interface – Add Page
2. Select a [PPP interface] name from the drop-down list, and then
enter or select data for each field.
Note: You can create multiple PPP interfaces only if you
are using the PPPoA protocol; only one PPP
interface can be defined if you are using PPPoE.
Check with your ISP which version of the protocol
they require.
The fields are defined in the tables on page 107 and 109.