SMC Networks ADSL Barricade SMC7204BRA - Manual (Page 118)

Adding EOA Interfaces
119
2. Click [Add]. The [EOA Interface – Add] page appears, as
shown in Figure 41.
Figure 41. EOA Interface – Add Page
3. Select one of the predefined interface names from the [EOA
Interface:] drop down list.
4. From the [Interface Sec Type:] drop-down list, select the level
of IP Firewall to be used on this interface, as defined on page
116.
5. In the [Lower Interface:] field, select the lower-level interface
name over which this protocol is being configured. If you are
using the ADSL Barricade as a bridge only, skip to step 10.
6. If you are using the ADSL Barricade as a router on your LAN,
enter the IP address for the interface in the [Conf. IP Address:]
field, and enter the network in the [Netmask:]. This address
serves as the public IP address for your entire LAN and is
usually assigned by your ISP.