SMC Networks ADSL Barricade SMC7204BRA - Manual (Page 50)

Configuring DHCP Server
47
Adding DHCP Server Address Pools
Follow these instructions to create an IP address pool:
1. Log into Configuration Manager, click the [LAN]
tab, and then click [DHCP Server] in the task bar.
The [Dynamic Host Configuration Protocol
(DHCP) Server Configuration] page appears:
Figure 10. Dynamic Host Configuration Protocol (DHCP)
Server Configuration Page
Depending on your preconfigured settings, the table may display
one or more address pools, each in a row, or may be empty.