SMC Networks ADSL Barricade SMC7204BRA - Manual (Page 33)

Getting Started with the Configuration Manager
28
Modifying Basic System Information
You can modify the basic system information, which includes the
system date and time, the names assigned to the ADSL Barricade
and the network domain in which it exists.
Note: Changing the ADSL Barricade date and time does not
affect the date and time on your PCs.
Follow these instructions to change the basic system information.
Services
Summary This table displays the status of various services that the ADSL
Barricade performs to help you manage your network. A green
check mark indicates that the service is active and a red X
indicates that it is inactive.
[NAT] : to translate private IP addresses to your public IP address
(Configuring Network Address Translation).
[IP Filter] : to set up the filtering rules that accept or deny incoming
or outgoing data (Configuring IP Filters and Blocking Protocols).
[RIP] : to enable router-to-router communication (Configuring the
Routing Information Protocol).
[DHCP Relay] : to enable dynamic assignment of IP information from
your ISP to your computers
(Configuring Dynamic Host Configuration
Protocol).
[DHCP Client] : to enable dynamic assignment of IP information from
your ISP or another computer on your network to the device’s LAN
port (Configuring the LAN Ports).
[DHCP Server]: to enable dynamic assignment of IP information from
the device’s built-in DHCP server to your LAN computers (Configuring
Dynamic Host Configuration).
[IGMP] : to enable message forwarding from external sources such
as your ISP, based on Internet Group Management Protocol (not
configurable).