SMC Networks ADSL Barricade SMC7204BRA - Manual (Page 14)

Quick Start
8
Figure 1. Overview of Hardware Connections
Step 1. Connect the ADSL cable
Connect one end of the provided phone cable (RJ-11) to the port
labeled ADSL on the Rear Panel of the device. Connect the other
end to your wall phone jack.
You can attach a telephone line to the device. This is helpful
when the ADSL line uses the only convenient wall phone jack.
If desired, connect the telephone cable to the port labeled Phone.
Warning: Although you use the same type of cable, the ADSL
and Phone ports are not interchangeable. Do not
route the ADSL connection through the Phone port.
Note: ADSL splitters/microfilters are included with some
models.
Wall Jack
To a hub: use cross-
over cable to uplink
port or straight cable
to standard port
or
To a PC: use a
cross-over cable
AC adapter
Networked Computers
Stand-alone computer
ADSL Barricade
Hub/switch (for local
area network)