Sharp AR-407 - Manual (Page 123)

7-11
CHAPTER
7
6 Insert the new staple cartridge into the box until it clicks
in place.
● Insert the new cartridge by aligning the arrows on the cartridge
with those on the box. Check that the cartridge locks in place by
pulling it slightly.
● The cartridge holds 5,000 staples.
7 Remove the rear paper and tape from the cartridge.
● Pull them straight. If they are pulled obliquely, the tape may be
torn.
8 Insert the staple box to the stapler unit until it clicks into
place.
9 Return the stapler unit to face down.
10 Push the finisher toward the copier and latch it in place.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)