Auto – Sharp AR-407 User Manual

Page 23

Advertising
background image

2-9

CHAPTER

2

MAKING COPIES

Copying from the document glass

COPYING FROM THE DOCUMENT GLASS

5

Press the START (

) key.

If the copier is in the GROUP mode (the sort icon is not displayed
on the touch panel), copying will start and the number in the copy
quantity display will decrease by 1 each time a copy is made. To
repeat the same copy sequence with a different original, simply
replace the original and press the START (

) key.

If the copier is in the SORT mode, the original will be scanned
when the START (

) key is pressed but copying will not begin.

Proceed to step 6.

To cancel a copy run, press the CLEAR ALL (

CA

) key. Copying

will stop and the number in the copy quantity display will be reset
to 0.

6

Remove the first original with the next original after the
START (

) key indicator lights up, and then press the

START (

) key. Repeat this step until all the originals

have been scanned. Then, press the “READ-END” key
on the touch panel.

Copying will start after the “READ-END” key is pressed.

Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.

2-sided copies from 1-sided originals

1

Set the last page of the document onto the document
glass, using the centring scale to position it.

NOTE:
Do not place objects under the original size detector, because they
may damage it.

2

Close the document feeder cover.

The original size will be indicated on the touch panel, and the paper
tray with the corresponding paper size will be automatically selected.

3

Press the 2-SIDED COPY key.

C

CLEAR

INTERRUPT

CA

CLEAR ALL

START

AUTO

AUTO

EXPOSURE

PAPER SELECT

100%

COPY RATIO

READ-END

PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].

AUTO A4

3

Centring scale

Original size detector

Advertising