Key operator programs – Sharp AR-407 User Manual
Page 156
8-6
CHAPTER
8
Category
Program Name
Function
Page No.
Disabling of
Prevents damage to the stapler while awaiting
8-26
Stapler
repair service.
(The stapler is included in an optional finisher
(AR-FN1N, AR-FN2).)
Disabling of
Prevents the selection of COVERS mode.
8-26
Covers Mode
Disabling of
Provides or prevents access to key operator programs
8-26
PC/Modem Access
through a PC/modem without key operator code entry.
Disabling of Second
Disables output of copies to the second tray in
8-27
Tray Output in
interrupt copying.
Interrupt
Disabling of Auto
Disables the auto power shut-off mode.
8-27
Power Shut-off Mode
Disabling of Beep
Enables or disables sounding of beep when keys
8-27
When Keys Touched
are touched.
Disabling of Bypass-
Disables the bypass tray when the offset is selected
8-28
Tray When Offset
for an optional finisher (AR-FN2 only).
Tray Selected
Other Programs
Total Count
Recalls the total counts, including counts of the
8-28
copier, document feeder, duplex module, and stapler.
Program List
Sequentially prints available key operator programs.
8-28
Printout
KEY OPERATOR PROGRAMS
KEY OPERATOR’S GUIDE
Key operator programs