Misfeed in the radf, Misfeed removal – Sharp AR-407 User Manual

Page 91

Advertising
background image

5-3

CHAPTER

5

Misfeed in the RADF

When the RADF misfeeds an original sheet, the copier will stop and the
misfeed message will appear.

An original misfeed may occur at one of three locations:
(A) in the RADF feed section, (B) in the exit roller, or (C)
under the transport belt.

(A) Open the feeding roller cover and pull the original gently

to the right and out from the document feeder tray.

Be sure to open and close the document feeder cover to cancel
the misfeed display.

(B) Open the exit roller cover and gently pull the original

out.

Be sure to open and close the document feeder cover to cancel
the misfeed display.

(C) Open the feeding roller cover and the document feeder

cover, and remove the original.

NOTE:
After misfed originals are removed from locations A, B and/or C, a
message may appear indicating the number of originals which
must be returned to the document feeder tray. Return the originals
and press the START (

) key to resume copying.

MISFEED REMOVAL

COPIER TROUBLE?

Misfeed removal

A MISFEED HAS OCCURRED.

CLEAR INDICATED AREA.

PRESS FOR RECOVERY INSTRUCTIONS.

A

B

C

Feeding roller cover

Exit roller cover

Advertising