Samsung SNC-C6225 - Manual (Page 24)

24 – 10x Network Mini Smart Dome Camera
operation
GENERAL/SPECIAL Image Setup
WB (White Balance) and AE (Auto Exposure) can
be set up independently for each preset. There are
2 modes, “General” mode & “Special” mode. The
General mode means that WB or AE can be set up
totally and simultaneously for all presets in “CAMERA
SETUP” menu. The Special mode means that WB
or AE can be set up independently or separately for
each preset in each preset setup menu. Each Special
WB/AE value should activate correspondingly when
camera arrives at each preset location.
During jog operation, General WB/AE value should be
applied. All Special WB/AE value will not be changed
although General WB/AE value change.
ONEAF Focus
This mode exchanges focus mode automatically
between Manual Focus mode and Auto Focus mode
by operation. Manual Focus mode activates in preset
operation and Auto Focus mode activates during jog
operation. With Manual mode at presets, Focus data
is memorized in each preset in advance and camera
calls focus data in correspondence with presets as
soon as camera arrives at a preset. It should shorten
time to get focuses.
Focus mode changes to Auto Focus mode
automatically when jog operation starts.
OSD DISPLAY OF MAIN SCREEN
P/T/Z Information
Current Pan/Tilt angle in degree, zoom magnifi cation
and a compass direction.
Camera ID
Current Camera ID (Address).
•
•
•
•
Action Title
Followings are possible Action Titles and their meaning.
“SET PRESET ×××” When Preset ××× is stored
“PRESET ×××” When camera reach to
Preset ×××
“PATTERN ×” When Pattern × is in action
“AUPx/PRESET XXX” When Auto Pan x is in action
“UNDEFINED” When undefi ned function is
called to run
Preset Label
The Label stored for specifi c Preset.
Alarm Information
This information shows current state of Alarm Input.
The “I” means Input and “O” is output. If an Input is
ON state it will show the number of input. If an Input is
OFF state, ‘-’ will be displayed. In the same way
“O :1” means output 1 is ON “O :-“ is OFF.
ex) When Point 2 of inputs are ON, and Output 1 is
On, OSD will show as below
Image Flip
Shows that images are currently reversed by D-Flip
Function.
Temperature
Current Temperature: Boxed “C” and “F” means
Celsius and Fahrenheit respectively.
Date/Time
Displays Current Date and Time.
GENERAL RULES OF KEY
OPERATION FOR MENU
The menu items surrounded with < > always has its
sub menu.
For all menu level, to go into sub menu, press ENTER
key.
To go to up-one-level menu, select BACK button.
To move from items to item in the menu, use joystick
in the Up/Down or Left/Right.
To change a value of an item, use Up/Down of the
joystick in the controller.
Press ENTER key to save values.
•
•
•
•
•
•
•
•
•
•
•
•
Preset Lable 1 LABEL12345 PRESET1 Action Title
Date/Time
Camera ID
Image Flip
Camera ID
P/T/Z Information
Temperature
Alarm
Information
I:-2 0:1
01/MAY/2009
00:00:01
CAM 1