Samsung SNC-C6225 - Manual (Page 32)

32 – 10x Network Mini Smart Dome Camera
how to use osd menu
Edit Pattern
c By using Joystick, move to start position with
appropriate zoom. To start pattern recording,
press ENTER key.
d Move camera with joystick of controller or run
preset function to memorize the path (mostly
curve path) in a selected pattern. The total
memory size and the rest memory size is
displayed in the form of bar. Maximum 1,200
communication commands can be stored in a
pattern.
e To save data and exit, press ENTER key.
❖
SCAN SETUP
SCAN NO. [1~8]
Selects Scan number to edit.
If a selected Scan number is not defi ned,
“UNDEFINED” will be displayed under selected Scan
number.
CLEAR SCAN [CANCEL/OK]
Deletes data in current Scan
EDIT SCAN Starts editing Scan.
Edit Scan
c Press ENTER key in “NO.” list to start Scan
setup.
d Note that Max. 20 Functions are allowed in a
Scan. Move cursor up/down and press ENTER
key to set up.
•
•
•
❖
EDIT PATTERN 1
MOVE TO START POSITION
[ENTER : START]
0/0/x1/N
EDIT PATTERN 1
[ENTER : SAVE]
0/0/X1/N
SCAN SETUP
SCAN NO. 1
UNDEFINED
CLEAR SCAN
CANCEL
<EDIT SCAN>
BACK
EXIT
EDIT SCAN 1
NO. ACTION NO. DWELL OPT
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
SAVE [ENTER : EDIT ACT]
CANCEL [LEFT : EDIT END]
EDIT SCAN 1
NO. ACTION NO. DWELL OPT
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
SAVE
CANCEL [ENTER
: EDIT]