Samsung SNC-C6225 - Manual (Page 29)

English – 29
how to use osd menu
Parking Action Setup
If Park Enable is set to ON, camera runs assigned
function automatically if there is no PTZ command
during assigned “WAIT TIME”.
PARK ENABLE [ON/OFF]
WAIT TIME [5 sec ~ 4 hour]
The time is displayed with “hh:mm:ss” format and
you can change this by 1 sec unit.
PARK ACTION
[HOME/PRESET/PATTERN/AUTOPAN/SCAN]
ex) If HOME is selected for Park Action, camera
will move to home position when there is no PTZ
command during assigned “WAIT TIME”.
FUNCTION SETUP
Confi gure 5 Special Functions with this menu.
PRESET SETUP
127 Presets from the number 1 to 128 can be
assigned excluding preset 95 reserved for Menu.
AUTO PAN SETUP
Up to 8 Auto Pans are available, which makes camera
to move slowly between two preset points.
❖
•
•
•
•
•
PATTERN SETUP
Up to 4 patterns can be stored in the dome.
In this function, path data created by manual move
of Joystick are recorded and you can playback the
identical path automatically whenever required.
SCAN SETUP
Up to 8 Scans can be defi ned.
In a Scan, max 20 entities are assigned from any
combinations of Preset/Auto Pan/Pattern. If you run a
Scan, camera will execute each entry sequentially.
SCHEDULE SETUP
7 rules of Schedule can be assigned by day and time.
Appropriate actions (such as Home, Preset, Auto Pan,
Pattern and Scan) can be defi ned for each rule. Also,
it is possible to use Weekday and Weekend in a rule
to make it simple.
•
•
•
PARKING ACTION SETUP
PARK ENABLE OFF
WAIT TIME 00:10:00
PARK ACTION HOME
BACK
EXIT
FUNCTION SETUP
<PRESET SETUP>
<AUTO PAN SETUP>
<PATTERN SETUP>
<SCAN SETUP>
<SCHEDULE SETUP>
BACK
EXIT