Samsung SNC-C6225 - Manual (Page 61)

English – 61
setup tool
DATE/TIME
Current System Time
Shows the time according to the setting of System
Time Setup.
System Time Setup
You can set the time synchronized with NTP server
(Time Server) or PC, or manually setup.
(
Ú The date can be confi gured between 1 January
2000 and 31 December 2037)
NTP Server IPs are provided by a public agency
and their list is therefore subject to change.
In a local network, a separate NTP server must
be manually defi ned.
The current time can vary depending on the
computers regional (GMT and DST) and country
(PC time confi guration) settings.
LOG
❖
•
❖
•
–
–
–
System Log List
Shows the log information about the system
changes along with time and IP address.
User Log In : Shows current camera login user.
Video Confi guration Change : Show video setting
changes.
System Time Change : Shows time changes.
System Start : Shows time when the camera is
turned on.
Up to 2000 logs can be recorde.
If the log number is over 2000, a log in the bottom of
log list will be deleted and added new log information.
SOFTWARE UPDATE
Current Version
Shows the current fi rmware version.
How to upgrade
Click [Browse…] button and select the latest
version of the fi rmware. Its fi le name should be
ex) SNC-C6225-WEB_v1.XX_XXXXXX.tgz
Click [Install] button. The fi le is uncompressed and
the software update begins. Software update may
take tens of minutes. To cancel an update, click the
[CANCEL] button.
When the software update is done, the system will
automatically restart. Since the current connection
is disconnected, you have to connect to the system
again.
Since, if the network is disconnected, the power fails or
the PC abnormally operates during a software update, the
system may not work afterwards. Care must be taken not
to cause a problem during an update.
❖
•
–
–
–
–
M


❖
•
❖
•
•
•
M
