Samsung SNC-C6225 - Manual (Page 42)

42 – 10x Network Mini Smart Dome Camera
network connection & setup
Connecting a local PC in the IP router to the camera
Run the IP Installer on your local PC and search for the camera.
If found, double-click the camera to start the Internet browser and
try to connect to the camera. Alternately, launch the Internet browser
manually and enter the IP address of the camera found in the address
bar to connect to it.
ex) http://192.168.1.2
Connecting to the camera from an IP router external PC
An IP router external PC can’t use the IP Installer to search for an IP router internal camera. This is because the IP
Installer does not work in a network where the gateway is different.
In this case, you can use the DDNS URL of the camera or the Internet IP address of the IP router to connect to
the IP router internal camera.
However, you must set the port-forwarding for the IP router before you can connect to the IP router internal
camera from a remote PC. For more information on the port-forwarding, refer to “Port Forwarding (Port
Mapping) Setting” on page 49.
When the port forwarding is done, run the Internet browser on the IP router External
PC and enter the DDNS URL address or, the Internet IP address of the IP router in the address bar for
connecting to the camera.
ex) http://e30002c.websamsung.net
For the DDNS URL address, refer to “Checking the DDNS address” on page 51.
A remote PC in an external Internet out of the LAN network may not be able to connect to the camera installed in the intranet if
the port-forwarding is not properly set or a fi rewall is set.
In this case, to resolve the problem, contact your network administrator.
1.
2.
1.
2.
3.
4.
•
M
