Instructions for use, Connecting the gigaset se366 wlan, Connecting to the dsl or cable modem – Sony SE366 User Manual
Page 22
22
First steps
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / device.fm / 13.11.2008
Sc
hablone 200
4_12
_27
Instructions for use
u
Never open or repair the device or mains adapter. For reasons of electrical safety it
may only be opened by authorised service technicians.
u
Never touch the pin and socket contacts with sharp or metallic objects.
u
Do not touch the mains adapters with wet hands.
u
Use an antistatic cloth to clean the device. Cleaning agents or solvents are not suit-
able.
Connecting the Gigaset SE366 WLAN
Before starting to connect PCs to your Gigaset SE366 WLAN, make sure that a wired or
wireless
is connected to the PC. Please read the user guide that came
with the device. Newer PCs and notebooks have wired Ethernet adapters, and often
wireless adapters, built in at the factory.
Connecting to the DSL or cable modem
ì
Connect the socket on the back of the router marked WAN to your DSL or cable
modem with an Ethernet cable.
Note:
Use a category 5 Ethernet cable with RJ45 jacks on both ends for all connections. The
cable will normally be included with your modem. However, you can also use the yel-
low Ethernet cable, which comes with the Gigaset SE366 WLAN.
DSL or cable modem