Sony SE366 User Manual
Page 98
98
Appendix
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / appendix.fm / 13.11.2008
Sc
hablone 200
4_12
_27
The Gigaset SE366 WLAN or
other PCs cannot be reached
by a PC in the connected
LAN with a ping command.
ì
Make sure that TCP/IP has been installed and con-
figured on all the PCs on the local network.
ì
Check that the IP addresses have been correctly
configured. In most cases you can use the DHCP
function of the Gigaset SE366 WLAN to assign
dynamic addresses to the PCs in the LAN. In this
case, you must configure the TCP/IP settings of
all the PCs so that they obtain their IP address
automatically.
If you configure the IP addresses in the LAN manu-
ally, remember to use subnet mask 255.255.255.x.
This means that the first three parts of the IP
address on each PC and the Gigaset SE366 WLAN
must be identical. The device must also be config-
ured as DNS server.
No connection to the
Gigaset SE366 WLAN's
configuration interface.
ì
Use the ping command to check whether you can
establish a network connection to the Gigaset
SE366 WLAN.
ì
Check the network cable between the PC you want
to use to manage the device and the Gigaset SE366
WLAN.
ì
If the PC you want to use is in the router's local net-
work, make sure that you are using the correct
IP address administration (see above).
ì
If the PC you want to use is not in the router's local
network, it must be authorised via Remote Man-
agement.
Password forgotten or lost
ì
Reset the Gigaset SE366 WLAN (see page 21).
Warning: Please bear in mind that this will return all
the configuration settings to the factory settings.
You cannot access a
resource (drive or printer)
on another PC.
ì
Make sure that TCP/IP has been installed and con-
figured on all the PCs on the local network and that
the PCs all belong to the same workgroup.
ì
Check whether the resource has been released on
the PC in question and whether you have the nec-
essary access rights.
ì
Printing: Check whether the printer has been set up
as a network printer.
Symptom
Possible cause and remedial actions