Sony SE366 - Manual (Page 84)

84
Administration and status information
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / admin_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
Updating the firmware
When Gigaset or your Internet provider makes a new version of the firmware available,
you can update the firmware for your Gigaset SE366 WLAN. To do this you must first
download the new firmware onto your PC.
Then proceed as follows:
ì
Close down all network activities on your local network.
ì
In the Administration menu, select Firmware Update.
The version of the firmware currently running on your device is displayed in the line
Current firmware version.
ì
In the Firmware update file field, enter the file with the new firmware you have
downloaded from the Internet.
ì
Click OK.
The firmware will now be updated.
After successful updating, the device is automatically rebooted. This will take some
time. After successful updating, the login screen appears again.
Note:
Do not switch off your Gigaset SE366 WLAN during the updating procedure. Updating
can take several minutes.
Note:
You can check whether the update process was successful in the Status menu on the
start screen (see page 87). This displays the current firmware version running on the
Gigaset SE366 WLAN.