Sony SE366 - Manual (Page 90)

90
Status information
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / admin_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
– NAT table
Shows the number of entries currently in the NAT table.
Click Empty to delete all existing entries in the NAT table.
u Dynamic DNS
– Dynamic DNS
Shows the status of dynamic DNS for your Internet connection.
– Domain name
Shows the domain name set for dynamic DNS.
ì
Click Refresh to refresh this screen and update the displayed data.
Local Network
You will find information about the settings for your local network in the Status menu
on the Local Network screen.
u IP address
Shows the local IP address of your device.
u Subnet mask
Shows the subnet mask used in the local network.
u MAC address
Shows the local MAC address of your device for wired data transmission.
u DHCP Server
– Status
Shows the status of the DHCP server for your device for automatic assignment of
IP addresses to clients in your local network.
u DHCP clients
Shows all clients in your network that have been assigned an IP address. The Host
name and the MAC address of each client are listed for identification. You are also
given information about the IP address assigned to each client as well as the
remaining Lease time for the IP address before the client is assigned a new address
by the DHCP server.
ì
Click Refresh to refresh this screen and update the displayed data.
Wireless Network
You will find information about the settings for your wireless network in the Status
menu on the Wireless Network screen.
u Status
Shows the status of the connection between your device and the wireless network.
u SSID
Shows the identity of your wireless network.