Sony SE366 - Manual (Page 73)

73
Configuring the Advanced Settings
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
If you select Hex as the key type, you can use the characters 0 to 9 and A to F.
– With a 64-bit encryption depth the key is exactly 10 characters long.
Example of a valid key: 1234567ABC
– With a 128-bit encryption depth the key is exactly 26 characters long.
Example of a valid key: 234567ABC8912345DEF1234567
If you select ASCII as the key type, you can use the characters 0 to 9, A to Z, and a
to z plus the special characters in the ASCII character set.
– With a 64-bit encryption depth the key is exactly 5 characters long.
Example of a valid key: GIGA1
– With a 128-bit encryption depth the key is exactly 13 characters long.
Example of a valid key: GIGASET_SE336
ì
Enter up to four keys in fields Key 1 to Key 4 and confirm these keys by entering
them again in fields
Confirm key 1 to Confirm key 4.
ì
Select one of the four keys as Default key.
ì
Click OK to apply the settings.
Note:
u It is very important that you make a note of keys you enter or generate. You
will need this information to configure the wireless network adapters cor-
rectly.
u When you have completed configuration you must also change WEP encryp-
tion on the wireless network adapters for the connected PCs; if you do not,
they will no longer be able to access the Gigaset SE366 WLAN's wireless net-
work.