Seiko FB-900 - Manual (Page 14)

iv
● ●
Caution
★
Unpack the printer. Make sure that the
printer body and all accessories are
included in the package and no parts are
damaged.
★
Do not use the printer in a location
exposed to direct sunlight or close to a
heater or other heat generating
equipment.
★
Before connecting or disconnecting the
interface cable, be sure to turn off the
printer.
★
Place the printer on a rigid, horizontal
base in a location that is free of vibration.
★
Do not use the printer in a dusty location
or any location subject to sudden
changes in temperature and humidity.
★
Do not connect the printer to a non-
standard power source.
★
Never try to print without a ribbon
cassette installed and paper loaded.
★
Do not turn off the printer during
p r i n t i n g , a s t h i s m a y l e a d t o a
malfunction.
★
Take care not to twist the ribbon while
installing the ribbon cassette.
★
Push the lock levers of both tractors
to the LOCK positions firmly while
loading fanfold paper or single sheet
p a p e r . I t i s f o r t h e p u r p o s e o f
setting paper path securely.
★
If the case or cover becomes dirty,
clean it with a soft cloth moistened
w i t h a s m a l l q u a n t i t y o f n e u t r a l
detergent diluted with water. Never
use a hard cloth or volatile solvent
such as alcohol, thinner, or benzine.
★
If any foreign matter gets into the
p r i n t e r , t u r n o f f t h e p r i n t e r
immediately and remove the foreign
matter.
Cautions in operation
Safety Cautions
Cautions in setting up
See page 3-1.
CAUTION !
Caution
Caution
★
Use two hands and hold firmly at each
end when lifting the cut sheet feeder.
Personal injury can occur if the CSF unit
is dropped.
★
Do not touch the print head immediately
after printing because it is too hot.
★
Do not put your finger under the tractor
cover while loading fanfold paper.