Seiko FB-900 - Manual (Page 66)

Lock function
Factory Default Setting Page
#32 : PAGE LENGTH LOCK ➞ NO 3-31
#33 : FONT LOCK ➞ NO 3-32
#34 : PITCH LOCK ➞ NO 3-32
#35 : QUALITY LOCK ➞ NO 3-33
#36 : CHARACTER TABLE LOCK ➞ NO 3-33
#92 : KEY LOCK ➞ NO 3-56
#93 : RESET KEY LOCK ➞ NO 3-56
Bar code and enlarged character
#40 : BARCODE/ENLARGED CHARACTER ➞ MODE 1 3-36
#41 : BARCODE TYPE ➞ CODE 39 3-37
#42 : BARCODE SIZE ➞ 1 3-39
#43 : ENLARGED CHARACTER SIZE ➞ 8 3-39
Operation condition
#19 : SELECT SAVE MEMORY ➞ MEMO 1 3-24
#20 : SELECT LOAD MEMORY ➞ MEMO 1 3-24
#20 : EMULATION ➞ EPSON 3-25
#44 : SETUP COMMAND ➞ VALID 3-40
#50 : PCL MODE (HP) ➞ PCL 3+ 3-40
#60 : OPTION ➞ NOT INSTALL 3-41
#62 : AUTO SCROLL ➞ NO SCROLL 3-42
#63 : P.OUT DETECTION ➞ YES 3-43
#64 : SKEW DETECTION ➞ YES 3-43
#65 : PAPER JAM ➞ YES 3-44
#67 : AUTO SCROLL POSITION ➞ ANY POS 3-45
#91 : DISPLAY LANGUAGE ➞ ENGLISH 3-55
#94 : SLEEP MODE ➞ YES 3-57
#95 : SETUP MENU LIST ➞ PATH & FORM 3-57
Interface condition
#70 : INTERFACE ➞ PARALLEL 3-46
#71 : SELECT IN ENABLE ➞ 0 3-47
#72 : PARITY BIT (SERIAL I/F) ➞ NON 3-47
#73 : DATA LENGTH (SERIAL I/F) ➞ 8 BITS 3-48
#74 : STOP BIT (SERIAL I/F) ➞ 1 BIT 3-48
#75 : PROTOCOL (SERIAL I/F) ➞ DTR 3-49
#76 : BAUD RATE (SERIAL I/F) ➞ 9600 B 3-49
#77 : SERIAL ERROR (SERIAL I/F) ➞ PRINT 3-50
#78 : CTS ENABLE (SERIAL I/F) ➞ NO 3-50
#79 : CD ENABLE (SERIAL I/F) ➞ NO 3-51
#80 : DSR ENABLE (SERIAL I/F) ➞ NO 3-51
#81 : BUFFER SIZE ➞ 64KB 3-52
#82 : BUSY/ACK TIMING (PARALLEL I/F) ➞ TYPE 2 3-53
#83 : DATA LATCH TIMING (PARALLEL I/F) ➞ TYPE F. 3-53
#84 : ERROR STATUS (PARALLEL I/F) ➞ YES 3-54
●
Factory default setting
3-7 — 3. Setup options —