Seiko FB-900 - Manual (Page 238)

BEL (07)D (07)H Activates the printer buzzer.
BS (08)D (08)H Moves the printing position to the left by one character.
HT (09)D (09)H Moves the printing position to the next horizontal tab.
LF (10)D (0A)H Single-line feeding
VT (11)D (0B)H Vertical tab
FF (12)D (0C)H Form feed (Always moves the printing position to the left margin.)
CR (13)D (0D)H Carriage return
SO (14)D (0E)H Double-width printing on a single line
SI (15)D (0F)H Specifies condensed mode.
DC1 (17)D (11)H Printer select
DC2 (18)D (12)H Cancels the condensed mode.
DC4 (20)D (14)H Cancels the double-width mode set by the SO command.
CAN (24)D (18)H Cancel
ESC (27)D (1B)H Escape
ESC EM (27)D (25 )D (1B)H (19)H Specifies the paper path.
ESC ✻ (27)D (42 )D (1B)H (2A)H Selects a graphic function.
ESC — (27)D (45 )D (1B)H (2D)H Specifies or cancels underscoring.
ESC 0 (27)D (48 )D (1B)H (30)H Specifies line feeding at 1/8-inch pitch.
ESC 1 (27)D (49 )D (1B)H (31)H Specifies line feeding at 7/72-inch pitch.
ESC 2 (27)D (50 )D (1B)H (32)H Executes ESC A.
ESC 3 (27)D (51 )D (1B)H (33)H Specifies n/216-inch line feed pitch.
ESC 3 (27)D (51 )D (1B)H (33)H Specifies n/180-inch line feed pitch. (AGM)
ESC 4 (27)D(52)D (1B)H (34)H Specifies TOF.
ESC 5 (27)D(53)D (1B)H (35)H Specifies or cancels automatic line feeding .
ESC 6 (27)D(54)D (1B)H (36)H Specifies character set 2.
ESC 7 (27)D(55)D (1B)H (37)H Specifies character set 1.
ESC : (27)D(58)D (1B,3A,00)H Specifies 12 cpi.
ESC = (27)D(61)D (1B)H (3D)H Specifies downloading.
ESC A (27)D(65)D (1B)H (41)H Specifies the line feed pitch in units of n/72 inch.
ESC A (27)D(65)D (1B)H (41)H Specifies the line feed pitch in units of n/60 inch. (AGM)
ESC B (27)D(66)D (1B)H (42)H Specifies the vertical tabs.
ESC C (27)D(67)D (1B)H (43)H Specifies the page length in number of lines.
ESC C NUL (27,67,00)D (1B,43,00)H Specifies the page length in inches.
ESC D (27)D (68 )D (1B)H (44)H Specifies the horizontal tabs.
ESC E (27)D(69)D (1B)H (45)H Specifies emphasized printing.
ESC F (27)D(70)D (1B)H (46)H Cancels emphasized printing.
ESC G (27)D(71)D (1B)H (47)H Specifies double-striking.
ESC H (27)D(72)D (1B)H (48)H Cancels double-striking.
ESC I (27)D(73)D (1B)H (49)H Selects the font.
ESC J (27)D(74)D (1B)H (4A)H Executes line feeding at a pitch of n/216 inches.
ESC J (27)D(74)D (1B)H (4A)H Executes line feeding at a pitch of n/180 inches. (AGM)
● IBM command list
Decimal Hexadecimal
Symbol Function
Code
IBM command list