Seiko FB-900 - Manual (Page 53)

1-30 —1. Setting up the printer—
1.
Turn on the printer power while keeping the
FORM FEED key or FORM FEED and ONLINE
keys depressed.
While printing the hexadecimal dump list, the following message is
displayed.
2.
Output data from the computer to the
printer.
The printer will begin to print the hexadecimal dump list.
3.
To stop the dump list printing, depress the
ALT and RESET keys for approximately two
seconds or turn the power switch to off.
● Input data hexadecimal dump
The printer can print an input data hexadecimal dump list, which contains all
input data in hexadecimal codes and corresponding ASCII characters. It is
possible to use this dump list to check whether data is being transferred in the
proper format by the computer to the printer when printing is not performed
properly.
Outputting the hexadecimal dump list
Draft printing: Turn on power while pressing the FORM FEED key.
LQ printing: Turn on power while pressing the FORM FEED and
ONLINE keys.
HEX DUMP LQ HEX DUMP DRAFT