Seiko FB-900 - Manual (Page 217)

9-17 — 9. Software setup functions —
●
Command
Control code
Corresponding setup function
Code Hexadecimal
HD + I + 0 + 3 + n (1B,7C,60,04,00,49, (61) Error status signal output (Setup Function #84)
30, 33,n)H
n = 0 YES
1 NO
HD + U + n (1B,7C,60,02,00,55,n)H (62) Printing direction (Setup Function #90)
n = 0 Pre-direction
1 Pre-direction
2 Uni-direction
3 Bi-direction
HD + z + n (1B,7C,60,02,00,7A,n)H (63) Display language on LCD (Setup Function #91)
n = 0 ENGLISH
1 DEUTSCH
2 FRANCAIS
3 ESPANOL
4 ITALIANO
HD + > + g + n (1B,7C,60,03,00,3E, (64) Locking panel keys other than RESET and
67, n)H ONLINE keys in the online state
(Setup Function #92)
n = 0 NO
1 YES
HD + > + e + n (1B,7C,60,03,00,3E, (65) RESET key lock in the online state
65, n)H (Setup Function #93)
n = 0 NO
1 YES
HD + SP + n1 + n2 (1B,7C,60,03,00,20, (66) Print Head Position
n1, n2)H
n = n1 + n2 x 256
Specifies the print head position in units of 1/360 inch
from the leftmost printable position.
The print head moves at the time that this command is
processed.
See page 3-54.
See page 3-55.
See page 3-55.
See page 3-56.
See page 3-56.