SMC Networks SMC2655W - Manual (Page 10)

5
EZ C
ONNECT
W
IRELESS
A
CCESS
P
OINT
I
NSTALLATION
1. Select the Site - Choose a proper place for
your SMC2655W Access Point. In general, the
best location to place the access point is at the
center of your wireless coverage area, within
line of sight to all your mobile stations.
2. Stand the Antenna - Stand the antenna. Proper
placement will improve performance. Try to
place the access point in a position that can
best cover its BSS (refer to page 15).
Normally, the higher you place the antenna,
the better the performance.
3. Connect the Ethernet Cable - The SMC2655W
can be wired to a 10 BASE-T Ethernet with a
network device such as a hub or a switch.
Connect into the RJ-45 connector socket on
the back panel with category 3, 4 or 5 UTP
Ethernet cable and an RJ-45 connector.
4. Connect the Power Cable - Connect the
power adapter cable to the 9V DC power
socket on the rear panel.
Warning: ONLY USE the power adapter
supplied with the SMC2655W.
Otherwise, the product may be
damaged.