SMC Networks SMC2655W - Manual (Page 15)

10
EZ C
ONNECT
W
IRELESS
A
CCESS
P
OINT
Accept “ANY” SSID - Checking this box will
enable the Access Point to accept the association
of wireless clients, using “ANY’ as their SSID. If
this feature is disabled(the box is not checked), the
wireless clients must use the same SSID as the
Access Point(thus enhancing security).
IP Address - Set the IP address as required.
(Default: “192.168.0.254”)
Note: The available IP address settings as
follows:
Subnet Mask - Set the Subnet Mask as required.
(Default: “255.255.255.0”)
Note: The available Subnet Mask settings as
follows:
Default Gateway - Set the default gateway as
required. (Default: “0.0.0.0”)
Note: The available Default Gateway settings as
follows:
DHCP - You can enable the DHCP Client
function to get IP Address, Subnet Mask and
Default Gateway automatically from the DHCP
server in your network. (Default: “Enabled”)
Note: If DHCP server doesn’t exist in your
network, then the Access Point will automatically
start up with the values in the IP Address field.