SMC Networks SMC2655W - Manual (Page 9)

4
EZ C
ONNECT
W
IRELESS
A
CCESS
P
OINT
LED Indicators
The EZ Connect Wireless Access Point includes
three status LED indicators, as described in the
following figure and table.
System Requirements
Before you install the EZ Connect Wireless Access
Point, be sure you can meet the following
requirements:
• An A/C power outlet (100~240V, 50~60Hz)
which will supply power for the access point
• An available RJ-45 (UTP) port on a 10BASE-T
Ethernet hub or switch.
• 802.11 compliant wireless ethernet adapters
with TCP/IP compatible protocol installed.
• Management Utility for configuration.