SMC Networks SMC2655W - Manual (Page 13)

8
EZ C
ONNECT
W
IRELESS
A
CCESS
P
OINT
2. When you run the installed utility, click on
“Command” and then select “Scan” from the
menu. The program will then detect all the
SMC2655Ws wired to the Ethernet network.
3. From the list of detected SMC2655Ws, select
and double click on the unit you want to
configure. A message box will examine your
password.
4. Please enter your password: “MiniAP” This
will let you connect to SMC2655W.
5. Click on “Command” and select “Configure
AP”, “Set MAC Filter”, “Change Password”,
“Reload Default”, “Reset AP” or “Update
Firmware” to the screen required.