SMC Networks SMC2655W - Manual (Page 14)

9
EZ C
ONNECT
W
IRELESS
A
CCESS
P
OINT
The Configure AP screen displays AP status and
settings shown above and you can configure the
settings.
BSS ID - Media Access Control (MAC) address.
Regulation Domain - Different countries have
different Regulation Domains which allow only
specific radio frequencies.
WEP - WEP (Wired Equivalent Privacy) Disabled/
Enabled status.
Associated Stations - Amount of wireless client.
Firmware Version - Here shows Firmware version.
In the Configure AP page, set the parameters and
then click on “Save” to implement the settings.
AP Name - Set your Access Point alias name.
(Default: “MiniAP”)
SSID - This should be set to the same value as
other stations in your network. (Default: “WLAN”)
Channel - Set the channel number as the operating
radio channel. (Default: “11”).
Note: The available channel settings are limited
to local regulations which determine which
channels are available.
FCC/IC: 1-11, ETSI: 1-13, France: 10-13,
Spain: 10-11, MKK: 1-14.
RTS Threshold - Set the RTS Threshold to enable
the RTS/CTS mechanism. (Default: 2,346, which
means Disabled)