Sony Portable MD Recorder MZ-RH710 - Manual (Page 16)

16
model name1[MZ-RH710] model name2[MZ------]
[2-593-568-11(2)]
masterpage:Left
filename[E:\SONY
PA\5252_RH710\REVISE\DATA\J9050645_2593568112RH710_GB\2593568112\01GB
-MZ-RH710EE\03GB0GET.fm]
Getting started
1
Insert an alkaline dry battery.
2
Make connections and unlock the controls.
1 Connect the headphones/earphones to
i
.
2 Slide HOLD to the opposite direction of
the arrow (.) on the recorder to
unlock the controls.
When to replace the dry
battery
You can check the battery condition on the
display window of the recorder.
Battery power decreasing
m
Weak battery
m
The battery is drained.
“LOW BATTERY” flashes in the
display, and the power goes off.
The battery level indication is approximate. It
may be more or less than the indication
depending on the operating condition or the
operating environment
.
Make sure to use an alkaline dry battery. If you
use a dry battery other than alkaline dry battery,
the battery life may become shorten.
e
E
2 Insert a size-AA alkaline
dry battery (minus
terminal first). 3 Close the lid. 1 Slide OPEN to open the
battery compartment lid.
HOLD
Connect firmly
To i
Note
020REG.book Page 16 Tuesday, April 12, 2005 11:18 AM