Sony Portable MD Recorder MZ-RH710 - Manual (Page 46)

46
model name1[MZ-RH710] model name2[MZ------]
[2-593-568-11(2)]
masterpage:Left
filename[E:\SONY
PA\5252_RH710\REVISE\DATA\J9050645_2593568112RH710_GB\2593568112\01GB
-MZ-RH710EE\04GB0OPE.fm]
5
Repeat step 4, and then enter all
characters of the label name.
6
Press NENT for 2 seconds or more
to enter the title
.
When the recording is stopped or the recording
moves on to the next track while labeling titles
during recording, the input at that point is
entered automatically.
Re-labeling
You can change the titles by doing the
procedure for “Labeling” (page 45).
• The recorder is able to display, but cannot
label using Japanese “Katakana” characters.
• The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device (in MD mode only).
To insert a blank
space. Press REC (+B)/
T MARK and press
the 5-way control key
towards > at the
same time.
To delete a letter. Press REC (+B)/
T MARK and press
the control key
towards . at the
same time.
To cancel labeling. Press x for 2 seconds
or more.
To move the cursor
from the letter
input area to the
character palette. Press the 5-way
control key towards
VOL –.
To move the cursor
from the character
palette to the letter
input area. Press x.
To display “ _
(space)”, “:”, “/”
or “–” at the input
position in the
letter input area.
Press X.
To switch between
capital letters and
small letters
.
Press X.
1) Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
Note
Functions 1) Operations
Notes
020REG.book Page 46 Tuesday, April 12, 2005 11:18 AM