Sony Portable MD Recorder MZ-RH710 - Manual (Page 33)

model name1[MZ-RH710] model name2[MZ------]
[2-593-568-11(2)]
masterpage:Right
filename[E:\SONY
PA\5252_RH710\REVISE\DATA\J9050645_2593568112RH710_GB\2593568112\01GB
-MZ-RH710EE\04GB0OPE.fm]
33
Recording without
creating a new group
The recorder is factory set to
automatically create a new group for each
recording. To record without creating a
new group, set the recorder as follows.
While the recorder is stopped, enter the
menu and select “REC Set” - “
:REC” -
“ : REC Off”.
What is the group function?
The group function allows you to place
several tracks into one unit.
For example, if you create a group for all
your favorite tracks, then you can select
that group to play those tracks.
The following figure shows the difference
between a disc on which groups are
recorded and a disc on which no groups
are recorded.
Disc with groups recorded
Disc with no groups recorded
You can record a maximum of 255 groups
on a disc.
If you record a track without creating a
group, but then later want to create a
group for that track, refer to “Assigning
tracks or groups as a new group (Group
Set)” (page 47).
MENU
5-way control key
(NENT)
Jog dial
1 2 3 4 5 6 7 1 2 3 4 5 1 2 3
Group 1 Group 3 Group 2
Tracks that were not assigned to a group are
treated as being part of “Group - -”.
Disc
1 2 4 5 6 7 8 12131415 3
Disc
020REG.book Page 33 Tuesday, April 12, 2005 11:18 AM