Sony Portable MD Recorder MZ-RH710 - Manual (Page 50)

50
model name1[MZ-RH710] model name2[MZ------]
[2-593-568-11(2)]
masterpage:Left
filename[E:\SONY
PA\5252_RH710\REVISE\DATA\J9050645_2593568112RH710_GB\2593568112\01GB
-MZ-RH710EE\04GB0OPE.fm]
1
While playing a track within a group
whose order you want to change,
enter the menu and select “Edit” -
“Move” - “
: Move”.
The name of the group to which the
currently selected track belongs
flashes in the display.
2
Turn the jog dial to select the
destination position, and then press
NENT to enter the selection.
If all tracks are moved out of the group, the
group automatically disappears from the disc.
Erasing tracks and the
entire disc (Erase)
Note that once a recorded item has
been erased, it cannot be
recovered. Make sure to confirm
the contents of the selected item
before erasing it.
When erasing tracks that have
been transferred from the
computer
When you try to erase tracks that have
been transferred from the computer,
“TrkFromPC” appears in the display. If
you erased tracks that have been
transferred from the computer, the
transfer authorization of the tracks will be
as follows.
• If the tracks were transferred in Hi-MD
mode, the transfer authorization of the
tracks are restored automatically when
you insert the disc into the recorder and
then connect the recorder to the
computer.
• If the tracks were transferred in MD
mode, the transfer authorization of the
tracks is lost. If you do not want to lose
the transfer authorization, restore the
authorization by transferring the tracks to
the computer again before erasing them.
Changing the order of a
group on a disc
Note
Name of the group you want to move
Example: When moving the group “My Best”
to the position after the group “Single
Collection”
Destination position in the disc
020REG.book Page 50 Tuesday, April 12, 2005 11:18 AM