Explanations – Sony Portable MD Recorder MZ-RH710 User Manual

Page 80

Advertising
background image

80

model name1[MZ-RH710] model name2[MZ------]

[2-593-568-11(2)]

masterpage:Left

filename[E:\SONY

PA\5252_RH710\REVISE\DATA\J9050645_2593568112RH710_GB\2593568112\01GB

-MZ-RH710EE\04GB0OPE.fm]

Explanations

About Hi-MD

“Hi-MD” is a new MiniDisc format.
Incorporating the new ATRAC3plus audio compression technology, Hi-MD is a new recording format
that delivers longer recording times than ordinary MDs. Hi-MD discs can also be used as a computer
storage medium for non-audio data such as text and images. This recorder supports Hi-MD only.
For more details on Hi-MD, refer to the supplied flyer “What you can do with the Hi-MD Walkman”.

About ATRAC3plus

ATRAC3plus is an enhanced version of ATRAC3.
Compared to ATRAC3 (used in LP2 and LP4 recording mode of MiniDisc components), which attains
a compression ratio 10 times higher than that of a CD, ATRAC3plus (used in Hi-SP and Hi-LP mode of
the recorder) achieves a higher compression ratio that is 20 times higher than that of a CD, but with no
loss in sound quality.

“Hi-MD mode” and “MD mode”

This recorder has two operation modes, “Hi-MD mode” and “MD mode”. The operation mode is
automatically recognized whenever the disc is inserted.
• When using a 1GB Hi-MD disc, the operation mode will only be Hi-MD.
• When using a standard disc (60/74/80 minutes), the operation mode can be set as follows.

About Linear PCM

Linear PCM is a digital, non-compressed audio coding system. You can enjoy high-quality sound equal
to that of CDs by recording in this mode.

The meaning of “no sound”

“No sound” describes a recorder condition in which the input level is about 4.8 mV during analog input
or less than –89 dB during optical (digital) input (with 0 dB as full bit (the maximum recordable level
for a MiniDisc)).

Disc condition

Operation mode

Blank disc

The mode set for the “Disc Mode” in the menu.

1)

, When recording on this recorder without using a

computer, set “Disc Mode” to “Hi-MD” so that the
operation mode will be “Hi-MD mode”.

1)

Refer to “Selecting the disc mode (Disc Mode)” (page 58) for the “Disc Mode” setting.

The disc contains material
recorded in Hi-MD mode

Hi-MD

The disc contains material
recorded in MD mode

MD

, You cannot use this recorder to record in MD mode

without using a computer. Recording in “MD mode” is
possible if you use the supplied software.

020REG.book Page 80 Tuesday, April 12, 2005 11:18 AM

Advertising