Sony CLIE PEG-S300/E - Manual (Page 16)

16
Cradle
1 Interface Connector
The interface connector is used to connect your CLIE handheld.
2 HotSync Button
Data stored on your CLIE handheld can be synchronized with the data
saved on a computer.
See “Exchanging and Updating Data Using HotSync Operations” on page
163 for more information.
3 Cradle Indicator
When you connect the AC adapter to the cradle and place the CLIE
handheld on the cradle, this indicator turns green and charging starts.
4 AC Adapter Connector
This connector is used to connect an AC adapter.
5 USB Connector
You can connect your CLIE handheld to a computer via the USB
connector.
Note
All connectors are SELV (Safety Extra Low Voltage) according to EN60950.