Sony CLIE PEG-S300/E - Manual (Page 221)

221
Setting Up
Y
our CLIE Handheld
l
Creating a login script
A login script is a series of commands that automates logging in to a
network server, for example, your corporate network or your Internet
Service Provider (ISP).
You can create login scripts by selecting commands from the “Command”
pick list in the “Login Script” dialog box. Some commands, such as
“Send,” require you to supply additional information. Those commands
have a parameter field so that you can add the necessary data.
1
Tap “Script” in the “Details” dialog box.
The “Login Script” screen appears.
2
Tap the “End” drop-down list.
3
Tap the command you want from the command list.
If the command requires additional information, a field appears to the
right of it for you to enter the information. The following commands
are available:
Wait For Tells your handheld to wait for specific characters
from the TCP/IP server before executing the next
command.
Wait For Prompt Detects a challenge-response prompt coming from
the server and then displays the dynamically
generated challenge value. You then enter the
challenge value into your token card, which in
turn generates a response value for you to enter on
your handheld. This command takes two
arguments, separated by a vertical bar (|) on the
input line.
Send Transmits specific characters to the TCP/IP server
to which you are connecting.
continued