Sanyo KH2672R - Manual (Page 26)

2
2 - 8
Using the Wireless Remote Controller (continued)
When using the wireless remote controller, always point the unitʼs transmitter
head directly at the air conditionerʼs receiver.
The wireless remote controller can be operated from either a non-fixed posi-
tion or a wall-mounted position.
To ensure that the air conditioner operates correctly, do not install the wireless
remote controller in the following places:
•
In direct sunlight
• Behind a curtain or other place where it is covered
• More than 26 ft away from the air conditioner
• In the path of the air conditionerʼs airstream
• Where it may become extremely hot or cold
• Where it may be subject to electrical or magnetic interference
1. If Non-fixed Position
Raise the rear plate of the wireless remote controller mounting cradle and
insert the wireless remote controller. The unit can be used either in that
position (placed on a table, for instance) or held in the hand.
2. If Wall-mounted Fixed Position
Install the wireless remote controller at a convenient location on a nearby
wall. However, before attaching the wireless remote controller mounting
cradle, check that the wireless remote controller can operate from the
desired wall position.
How to Use the Wireless
Remote Controller
Wireless Remote Controller
Installation Position
Remote control
receiver
Air conditioner
Wireless remote controller
(Transmitter head)
Wireless remote controller
mounting cradle
Rear plate
Wireless remote
controller
Secure the installation fitting of the wireless
remote control unit using the screws.
Press.
1
2
Place
here.
Installation fitting of wireless remote control unit
Procedure for installing the
wireless remote control unit
05-368 PAC-i_IM_Sec2 12/7/05 4:36 PM Page 8