Sharp JW-21MN - Manual (Page 72)

11-19
Set connection status of slave station [bit pattern, byte]
Set "connected slave station as 01 and 02, output
error code" in paramenter address 007750
(8)
.
7 6 5 4 3 2 1 0
0 0 0 0 0 1 1 1
007750 (8)
Turn "ON" bits 1 and 2 (connects slave station 01 and
02)
Turn "ON" bit 0 (output error code)
Display the contents of parameter address 007750
(8)
Screen display of JW-14PG
V2 Set whether the station number information should be output or not
Set whether the station number information should be output or not on the parameter address
007763
(8) .
007763
(8)
Whether the station
number information
should be output or not
00
(H)
: Do not output
01
(H)
: Output
The station number information is output on the next
byte of the flag area (24 bytes.)
This setting is valid when the parameter address is
007767
(8)
= 80
(H) .
To the next page
07746
07747
I PARAM.
>07750
From the previous page