Solid State Logic Duality 82S6DUA20C - Manual (Page 83)

Duality Nuendo Control
Duality Nuendo Control Button Layout
The majority of Nuendo or Cubase functions are controlled via dedicated buttons, with virtually no reliance on
the 8x8 menu buttons located beneath the TFT screen. Full details are available in the Mackie Control manual,
which is available from the Nuendo download site: http://www.steinberg.de/439_0.html
When compared to the HUI protocol front panel, the major differences here are the new control set for assigning
processing parameters to the D-pots. Up and down page buttons for D-pot parameters are located within the
Shift button block. The rotary encoder will also output page up/down commands when turned left or right.
RDY and SEL control the function of the channel SEL buttons as with the HUI interface. The EDIT button is
used to open editing windows in Nuendo or Cubase for the current selection. Pressing EDIT together with SHIFT
will close an active window.
CHANNEL is unchanged and assigns Duality’s channel gain element or DAW channel to the D-pot according to
the state of the Console Focus button. The encoder switch is used to ‘flip’ parameters onto the faders as before
but includes all processing parameters, not just send levels.
The Transport Control buttons are assigned to related transport functions as with the HUI interface:
Note that tallies for the CYCLE and PUNCH functions are displayed in the status area of the TFT display.
LEFT RIGHT CYCLE PUNCH
PREV ADD NEXT
Push to Flip
INST SOLO
UNDO
ESC MASTER
PAN
MOTORS
SAVE
ENTER
PLUG-IN CHANNEL
EQ
NAME
SHIFT SEND
RDY SEL EDIT
READ WRITE
SMPTE
CHANNEL
MIX
PROJ
AUX2
EFFECTS
BEATS
VALUE
Duality Operator’s Manual 3 - 3 3