Sanyo DVD-L70 - Manual (Page 15)

-E15-
1
Press [FUNCTION] on the unit or on the remote control
to select the DVD mode.
Each time you press the button, the screen will change
as follows.
TV mode External Input mode DVD mode TV
mode...
Once you select the DVD mode, “SANYO” is displayed
on the screen.
• It may take a few moments when switching from an
external input mode to the DVD mode.
2
Press [DISC OPEN] to open the disc tray on the unit
and pull the tray toward you.
After pressing the button to open the disc, and after the
symbol “ ” stops flashing on the screen, the disc tray
will open a bit, so open the disc tray further towards you. 3
4
Notes:
• If a non-compatible disc is loaded, “Incor-
rect Disc”, “Region Code Error” or “Paren-
tal Error” will appear on the TV screen ac-
cording to the type of loaded disc. In this
case, check your disc again (see page E14
and E36).
• Some discs may take a minute or so to start
playback.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
press [DISC OPEN] or [PLAY], “Reading”
will appear and remain on the screen for
approx. 1 minute and then it will change to
“Incorrect Disc”.
• Some playback operations of DVDs may
be intentionally fixed by software produc-
ers. Since this unit plays DVDs according
to the disc contents the software produc-
ers designed, some playback features may
not be available. Also refer to the instruc-
tions supplied with the DVDs.
• A menu screen may appear on the TV
screen, if the disc has a menu feature. In
this case, press [ ], [ ], [ ], [ ], [ENTER]
or [PLAY] to operate a menu feature. (The
menu screen may not be displayed, de-
pending on the disc’s specifications.)
Push the disc tray to close.
On the screen, “ ” changes to “Reading” and then play-
back will commence.
• Press [PLAY] for CDs to start playback.
• Some discs may not start automatically, depending on
the disc.
• If it is an Audio CD, the status display (page E33) is
displayed.
• If it is an MP3/WMA/JPEG CD, the file menu (page
E18) is displayed.
• If it is a KODAK Picture CD, the thumbnail pictures
(page E19) are displayed.
5
You can adjust the volume by pressing [VOLUME] +/–
on the unit or on the remote control. 6
CD DVD
Reading
➡
2
6
1
PLAY
2 6 1 3
PLAY
MP3
Place a disc onto the tray.
Hold the disc, position it with the
printed label side up, align it with
the guides, and place it in its proper
position.
Press [ /ON].
The power comes on with the TV screen displayed.
The STANDBY indicator turns off.
• Every time you turn on the power, it goes to TV mode
and the TV screen is displayed.
PLAYBACK PROCEDURE
JPEG WMA
Important Note:
“ ” may appear on the TV screen during
operation. This icon means that the function
is not available on the disc now.
5D90401A P14-23 26/06/2003, 16:52 15