Sanyo DVD-L70 - Manual (Page 22)

-E22-
PREV
PLAY
NEXT
STOP
PAUSE
, , ,
ENTER
Number
Buttons
MENU
ANGLE
TOP MENU
After the last picture has displayed, the file list appears.
• To stop the slide show, press [STOP]. The file list appears.
• If [MENU] is pressed during the slide show, the thumbnail
pictures appear.
The slide show enables you to view pictures (files) one after
another automatically.
Press [ b ], [ a ] or [ENTER] to select folder.
Press [ 4 ], [ 5 ], [ b ], [ a ] or number buttons [0–9] to select
your desired file.
• In case the folder include more than 15 files, press [
b ]
or [ a ] to display next file list.
• You can also select the desired picture from the
thumbnail pictures. See “Selecting a picture from the
thumbnail pictures” on page E21.
Press [ENTER] to start slide show from the selected file.
• If you press [PAUSE] during the slide show, the slide
show stops temporary. “ k ” appears briefly on the picture.
Press [PLAY] (or [NEXT]) again to resume the slide
show.
• If the picture appears upside down or sideways,
please do the following steps.
1) Press [PAUSE], if necessary.
2) Press [ANGLE] repeatedly until it’s right side up.
Example:
3) Press [PLAY] (or [NEXT]) to skip to the next picture
and continue the slide show.
• If you press [NEXT] or [PREV] during the slide show,
it skips to the next or previous picture.
• If you press [MENU], the
thumbnail pictures appear.
: Indicates MP3-file
/0-9/Enter/Play Mode/Menu
: Indicates WMA-file
: Indicates JPEG-file
If the disc is mixed with MP3, WMA
and JPEG files…
1. Press [ 4 ], [ a ], [ 5 ] or [ b ] to move the
highlighted box to the desired file.
Example:
2. Press [ENTER] to start playback (or slide
show).
• If you start from the MP3 or WMA
file,
the unit plays
both MP3 and WMA files.
B u t t h e u n i t s k i p s t h e J P E G f i l e s
automatically.
• If you start from the JPEG file, the unit
plays the JPEG files. But the unit skips
both MP3 and WMA files automatically.
• If you want to display only MP3/WMA
or JPEG file, you need to set “Select
Files” on page E34.
Preparation:
1. If a disc loaded, remove the disc first.
2. Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or
“15 Seconds” (see page E34).
Load the disc with the label facing up on the disc tray.
(Please refer to “MP3/WMA CD OPERATION” on page
E18.)
• The file list appears on the TV screen.
Example:
1
-/36
2
3
4
5
Pic-1
CD-R
Pic-2
Pic-3
Pic-4
Pic-5
8
9
10
11
12
Pic-8
Pic-9
Pic-10
Pic-11
Pic-12
6 Pic-6 13 Pic-13
7 Pic-7 14 Pic-14
Collection
/0-9/Enter/Play Mode/Menu
1
2
3
4
➡
To start the Slide Show
•“ ”, “ ”, “ ”
or “ ” appears briefly
on the TV screen.
Important Note:
“ ” may appear on the TV screen during
operation. This icon means that the function
is not available on the disc now.
5D90401A P14-23 26/06/2003, 16:53 22