Sanyo DVD-L70 - Manual (Page 35)

-E35-
Dynamic Range Control
When you playback discs recorded with Dolby Digital, this
function makes it easier to hear the sound from the connected
TV, even if the volume is reduced.
Press [SETUP] in the stop mode.
“Language” is selected.
Press [ ] or [ ] to select desired setting.
Std: Plays back with the sound recorded on the disc.
TV: When connect to the TV and set this if you feel the
sound is too low.
Press [ENTER].
Press [SETUP] to close the screen.
1
2
3
4
5
6
This function sets the DRC (Volume) for a
DVD disc.
The settings will be retained in the memory
until they are changed, even if the power is
turned off or the disc is replaced.
Language Picture Parental Other Sound
DRC TV
/Enter/Setup
Language Picture Parental Other Sound
DRC Std Std
TV
/Enter/Setup
DVD
Language Picture Parental Other Sound
/Enter/Setup
2
3
1, 6
4
3, 5
DYNAMIC RANGE CONTROL
Notes:
• This function works only during playback of
Dolby Digital recorded discs.
• This function does not work with sound
output from an optical terminal.
• DRC stands for Dynamic Range Control.
• If you feel the sound is distorted when you
playback, switch the mode setting to “Std”.
Press [ ] to select “Sound”.
Press [ ] to select “DRC”, then press [ ] or [ENTER].
5D90401A P29-38 26/06/2003, 16:54 35